5.5kw R97 32I 1100n. M 45rpm Helical Speed Gear Reducer R Series Bevel Gear Motor Reduction

• Customization: Available
• Application: Motor, Machinery, Agricultural Machinery, Industrial Automation Equipment, Chemical Industry
• Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
• Model NO.: R Series
• Hardness: Hardened Tooth Surface
• Installation: Multiple Installation Types
• Step: Three-Step
• Type: Cylindrical Gear Box
• Gear Shape: Helical Gear
• Ratio: 1~10000
• Certificate: CE, ISO
• Colour: Blue Silver Customerized
• Delivery Time: 2-4weeks
• Transport Package: Wooden Case
• Specification: 37, 47, 57, 67, 77, 87, 97, 107, 127, 157
• Trademark: Tili
• Origin: Changzhou, China
• HS Code: 8483409000
• Production Capacity: 50000pieces Per Year
• Package Size: 60.00cm * 60.00cm * 60.00cm
• Package Gross Weight: 25.000kg

Product Description

Dimensional Description

Output shafts of R series geared motors are vertical to input shafts. Each units consist of two stages helical gears and one stage bevel gears.

Features of Products

1. Highly Standard Modular Designed: The products are easily connected with and driven by different types of motors or other kinds of input power. The same type geared motor can be adapted to optioned powers of motors. It is therefore easy to realize different solutions for varied requirements.

2. Ratio: Featured many closely divided ratios and wide range of them, Very big final ratios can be obtained through combined unites lo reach extremely low output speeds.

3. Mounting Arrangement: No strict limitation to the mounting arrangement.

4. High strength, Compact Dimension: Housings are made of high strength cast iron. Gears and shaft gears are finished with gas carburising process and precise grounding to sequentially get high loading capacity of per certain volume.

5. Long Service Life: Under the condition of accurately selecting type size and the normal maintenance and use main components (except those easily disabled parts )can last as long as up to more than 25,000 hours. Easily-disabled parts include lubricating oil, oil seals, and bearings.

6. Low Noise: All key components are finished by precisely machining, accurate assembly, and finally tested, and therefore, fairly low noise is reached.

7. High Efficiency: The efficiency of gear unit can reach 95%, The efficiency of worm gear unit can reach 89%.

8. Large radial loading ability.

9. Axial load ability of up to 5% of radial load.

 

Site Conditions

The geared motors are suitabie for the operation silesin the ambient temperatures from. 10ºC to 40ºC and altitudes up to 1000m above the sea lever.
They can be used both for clockwise running and anti-clockwise running.
There is no limitation to specific application field.

While applied in other aggressive operating atmosphere environment conditions. please contact our technology department.

 

Description of Selection Tables

1. Selection Table [ Constant Power ]:

Motor Power Pm [ kW ]: Power is indicated on the basis of Y₂ motor.

 

Output Speed n_a [ r/min ]: Output speed is calculated on the basis of motor's fully loading speed and geared motor's ratio. Unit: revolutions per minute.

Output Torque M_a [ Nm ]: Torque available at output shaft while motor being fully loaded. All internal efficiency factors have already considered.

Ratio [i]: Exact final total transmission ratio from input to output

Permissible Radial Load F_Ra [ kN ]: Permissible radial load on the middle point of overhung shaft ( F_Ra value listed in the table must be multiplied by 0.4, if load is placed on the end point of the shaft ). The mathematic product of actual radial load Fr and actual service factor f_A should not be bigger than this F_Ra, i.e. F_Ra>f_A*Fr (for f_A- please see the description of f_B ). Normally, Fr of a working unit can be got through the following:

Fr=Mr*fr/r (N)

where, Mr - working torque of the working unit (Nm)

r - pitch circle radius of the working unit (m)

fr - radial load factor, which can be got refer to the following:

fr=1, for single chain sprocket wheel

fr=1.25, for single gear or for double chain sprocket wheel

fr=1.5, for V-section belt

fr=2.5. for flat belt

Service Factor f_B: The ratio of rated power of gear uni!to rated power of motor power. it is essential data to select the size and strength of gear unit.

Type Size of Unit: including type and size. individual unit and combined units are available. Combination is considered commonly under the constant power condition.Each type ( and even some other typos not mentioned in the tables )can be assembled or combined to any ratio mentioned in the tables. For the detailed construction dimension, see the relevant menstonal tables.

Pole Number of Motor: The pole number of Y₂ motor.

Mass (Weight) [ kg ]: Not weight of geared unit, without the motor. This weight is only for your general reference.

 

2. Selection Table ( Constant Torque):

Constant torque selection table is suitable for the conditions where the constant torque system is applied appropriately.If the Max, torque listed in this table is used when calculating.service factor is 1.0, The meanings of other terms are similar to ones described in Selection Table (Constant Power).

Selection Steps

1. Type Selection

Types of units are normally selected by customers to meet transmission mounting arrangement requirement. Series Gand seres GF are applied to the conditions that input shafts are parallel to output shafts. And, series GS and series Gk are applied to the conditions that input shaft are vertical to output shafts.

2. Selection of actual Service Factor f_A

1) Normal requirement

f_A is determined by load feature, operating hours, starts and stops number per hour of working unit. The normal total combined service factor is calculated as follows:

f_A=f_Ah*f_Ac

Where: fAh-the factor determined by load feature and operating hours of per day. See the table of fAh. The other working unit's fAh out of the table could be determined by analogy.

f_Ac-the factor determined by number of starts and stopper hour of working unit.

Attention:the number should be counted even start or stop.

2) Special requirement

If the ambient temperature is special high, the temperature factor fAt should be considered, refer to the factor fAt column of selection table.

If requiring higher reliability, the security factor fAs should be considered.

When you can't select the value of service factor, contact with us.

 

3. Selection of Type (size)

It is essential to meet following: f_B≥f_A

1) For constant power

(1)The motor is mounted directly into gear unit or with coupling

a. Reach to a relevant power and pole number of motor from selection table (constant power)

b. Select rudely a size with close ratio, and record it's f_B.

c. Compare, if meet this formula: f_B>f_A, then this size gear unit is available. Otherwise select a bigger size of gear unit until meet it.

(2) The gear unit with prefixion deceleration unit

When connecting the motor and gear unit using gears, belts or chains, etc, Because the torque of input has been increased, so it is essential to convert motor power into input power of gear unit, the input power is to multiply motor power by radio. Select the size according to the power converted from the selection table. Attention: the number of motor pole is same.

2) For constant torque

Select the size of gear unit according to the power and pole of motor and radio from selection table (constant torque). It is essential to restrict the working torque under maximal torque of gear unit selected.

4. Radial Load checking

It will checking overhang load, if the gears, belts and chains, etc, are fired on the shaft of the gear motors. For checking method, refer to the relevant contents in fore.named description of selection table.

5,Mounting Dimension checking

Check the mounting dimension when there is a limitation to site mounting condition.If the selected type by the above method is appropriate to site mounting condition, this final type is standard and should be written in formal type description. if any speciaa requirement is requested, please describe it while placing order.

 

Normal Delivery Condition:

1. Motor: Y₂ motor of protection class lP54 and of insulation class F₁ while no special request. But this insulation class F motor is generally recommended to be used in the condition where the class B is required.

2. Terminal box: Terminal box is at 0" position if no special request (see description of motor terminal box position).

3. Rotation direction: There will be no mark of rotation direction for input shaft or output shaft, if the relationship between input shaft and output shaft is not requested.

4.Lubricants: Units are supplied with lubricant oil before delivery.

5. Accessories: Generally, accessories excluded in mounting dimension table do not belong to our standard supply.

 

Serwice Factor F_Ah

Application	8 hours / day	16 hours / day	24 hours / day
Food Industry Crushers Beet Slicers, Kneaders Meat Grinders Filling Machines Dough Mixers Extruders Sugar Cane Knives Sugar Roller Mills Toasters	1.75 1.25 1.25 0.8~1 1 1.25 1.75 1.75 1.25	2 1.5 1.5 1 1.25 1.5 1.75 1.75 1.25	2.25 1.75 1.5 1.25 1.5 1.75 1.75 1.75 1.25
Auxiliary Drives, Servicing Inching,No Load Normal Duty	0.8-1 1.25	1.25	1.25
Compressors Centrifugal Lobe	1 1	1.25 1.25	1.5 1.5
Filters	1	1.25	1.5
Construction Industry Cement Mixers Cement Mills Mortar Spraying Machine	1.25 1.5 0.8~1	1.5 1.75 1	1.75 2 1.25
Generators	0.8-1	1	1.25
Water Treatment, Environment Tools Aerators Common Aerators Carrousel Aerators Bar Screens, Collectors Screw Pumps	1.75 1.5 1.75 0.8-1 1	2.0 1.5 1.75 1 1.25	2.0 1.5 1.75 1.25 1.5
Screens Rotary(for stone, for gravel) Traveling Water Intake	1 0.8-1	1.25 1	1.5 1.25
Agricultural Machinery Manure Scrapers  Harvesting machines	0.8-1 0.8-1	1 1
Cranes and Hoists Travel Gears  Slewing Gears Hoisting Gears Derricking Jib Cranes	1.5 125 1.25 1.25	1.75 1.5 1.5 1.5	2.0 2.0 1.75 1.75
Mixers Constant Density Variable Density	1.25 1.5	1.5 1.75	1.5 1.75
Lumber and Plastic Industry Main Drive for Saws Feed Drive for Saws Chopping Machines Veneer Gluing Machines  Drilling Machines Extruders	1.5 1 1.5 0.8-1 0.8-1 1.25	1.75 1.25 1.75 1 1 1.5	2 1.5 2 1.25 1.25 1.75
Agitators Pure Liquids (Constant Density) Liquids with Variable Density Liquids and Solids	1.25 1.5 1.5	1.5 1.75 1.75	1.5 2.0 2.0
Mills Ball, Rod Hammer, Desintegrator	1.75 1.5	1.75 1.75	1.75 2
Printing and Paper Techniques Cutters Reels Bale Feeders	1 0.8-1 1	1.25 1 1.25	1.5 1.25 1.25
Elevators Bucket Elevators Freight Elevalors Escalators	1.25 1.25 1.25	1.5 1.5 1.25	1.75 1.75 1.5
Textile Industry Looms Spinners Washers	1.25 0.8-1 1	1.5 1 1.25	1.75 1.25 1.5
Conveyors Bucket Conveyors Uniformly Loaded or Fed Heavy Duty, Chain & Screw Conveyors  Shaker Conveyors Hoists Belt Conveyors Hauling Winches	1.5 0.8-1 1.25 1.5 1.5 1.25 1.5	1.75 1 1.5 1.75 1.75 1.5 1.75	1.75 1.25 1.5 2 1.75 1.5 1.75
Apron Conveyors	1.25	1.25	1.5
Fans Centrifugal Industrial Fans Cooling Tower Drivers Cooling Tower Fans	0.8-1 1 1.75 1.75	1 1.25 1.75 2.0	1.25 1.5 1.75 2.0
Packing Machine Cardboard Stacking Machine Wrapping Machine	1.25 0.8-1	1.5 1	1.75 1.25
Machine tools Plate Surfacers, Plate Planers, Bending Rolls Main Drives, Feed Drives Feed and Auxiliary Drive Presses Folding Machines Plate Shears	1.25 1 0.8-1 1.75 1.5 1.75	1.5 1.25 1 2 1.75 2	1.75 1.5 1.25 2 2 2
Iron and Steel Industry Wire Draw Benches Winding Machines Rolling Mill: Non Reversing                    - Group Drives                          - Individual Drives	1.25 1 25   1.25 1.5	1.5 1.75   1.5 1.75	1.75 1.75   1.75 2
Pumps Centrifugal Rotary, Gear Type, Lobe, Vane Piston Pumps: Single Cylinder                          Multi Cylinder Screw Pumps	1 0.8-1 1.5 1.25 1	1.25 1 1.75 1.5 1.25	1.5 1.25 2 1.75 1.5

Service Factor f_AC

Number of Starts and Stop / Hour
<10	1
<100	1.15
<500	1.25

Service Factor f_At

Ambient Temperature	+20ºC···	+20ºC···+30ºC	+30ºC···+40ºC	+40ºC···+50ºC	+50ºC···+60ºC
fAt	1	1.1	1.25	1.5	1.75

 

  Company Profile

 

About TILI

"First-class team, first-rate products, first-class technology, and first-class service."

The history of Changzhou Tili Gear Reducer Co,Ltd. has long history and it was established in 2003. lt specializes in the production of gear reducers. with an annual outout of up to 100,000 sets,and its products are sold worldwide. They are widely used in the fields of plastics, rubber, metallurgy mines, petroleum chemical industry, lifting transportation, light food, etc.

We have a modern mechanical processing center and high-precision gear manufacturing and testing equipment (such as thosemade by Germany, Japan, and Switzerland). Our mature production processes and rigorous quality management have ISO quality management system certification, with product quality reaching 99.9%. We also obtained CE certification. The technical team has outstanding R&D capabilities and possesses dozens of patents. We strive for enthusiastic, meticulous, and thoughtful services to provide customers with the most perfect solutions.

Mission & Vision

In the era of rapid progress of Industrial Science and technology, only constant change and innovation can meet the needs of customers. TiLi reducer company adheres to the corporate vision of "sustainable operation" and attaches importance to the concept of quality, service and marketing. In the global competitive environment, it is a firm belief to meet the quality requirements of customers and strive for stable growth and continuous improvement. Hope to uphold the principle of integrity, grow together with customers and share with employees.

Our Vision is to be a respected & innovative driven company.
Our Value is to be professional, reliable & innovative.

 

  Certifications

  FAQ

Q1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer. 

 

Q2: Can you do OEM?
A: Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers, pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q6: How to choose a gearbox? What if I don't know which gear reducer I need?
A: You can refer to our catalogue to choose the gearbox or we can help to choose when you provide, the technical information of required output torque, output speed and motor parameter etc. Don't worry, Send as much information as you can, our team will help you find the right one you are looking for.

Q7: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color. c) Purchase quantity. d) Other special requirements.

Q8: What is the payment term?
A: You can pay via T/T(30% in advance as deposit before production +70% before delivery.